With the lighting circuit and dice mounts successfully attached to the base layer, the final stage of creating the Infinite dGauntlet was to create the outer wrapping layer. For the design I took primary inspiration from the Nano-gauntlet in Avengers: Endgame, as this was closest to the Iron Man red/gold colour scheme that would fit best with Dungeon Master.
I used the same template I had created for the base layer, but added around 1cm of depth in order to add space for the circuit board and wiring, and added cut-out sections through which the dice mounts would protrude. Using the same black cotton fabric as a base, I used metallic red and gold spandex to build up the required design, using metallic thread which did not play well with the sewing machine at all.
The fingers were similarly designed, essentially creating short tubes of fabric to be attached to a simple black glove that would be sewn inside the base layer.
All that was left was to slip the outer layer wrist/palm section over the top and hand-sew the seams.
The dice were then secured in their mounts using superglue to complete the Gauntlet.
